Package Quantity: 1/Pkg Brand: Versa Material: Aluminum Pole; Aluminum knob (O2 Flowmeter) Overall Dimensions: 27" W x 27" D x 54" H
Quantity
Choose a comparable product or call 1-800-225-7911 for assistance

Versa II Anesthesia System supports 2 vaporizers or converts to a tabletop without any additional accessories.

  • Rebreathing/Non-Rebreathing Switch: Allows fast and easy conversion between rebreathing and non-rebreathing circuits
  • Administer a breath to the patient by pressing the button on top of the safety relief pop-off valve while squeezing the bag and watching the manometer, releasing the button when finished
  • Made with materials manufactured to withstand harsh chemical use
  • Added syringe holder for convenience
  • Vaporizer sold separately
  • Monitor Shelf Dimensions: 15.75" W x 7" D
  • O2 Flush Valve: Nominal 28 LPM output at 50 psi
  • Male and Female Endcaps: 23 mm taper to meet ISO standards
  • Fresh Gas Outlet: 15 mm taper to meet ISO standards
  • Absorber Canister Knob: Large fluted design allows for a secure grip while tightening canister
  • Dome Caps: Reinforced polycarbonate
  • Patterson Safety Relief Pop-Off Valve: Pressure relieves at 20–25 cm H2O. Easily administer a breath by using the push button. Less than 1 cm H2O pressure when fully open or closed. Cap included to allow for ventilator use as well as the ability to perform a pressure test without having to close the popoff valve and hold the button down during the duration of the test
  • Manometer: 0 – 60 cm H2O pressure, 0 – 60 cm H2O vacuum; maintenance-free
  • Inhale/Exhale/Bag Port: 22 mm taper to meet ISO standards; easy to remove and clean
  • Absorber Block: Chemical-resistant material with durable coating
  • Absorber Canister: 1200 mL capacity with divider for efficient use of absorbent
  • Absorber Gasket: Silicone for enhanced sealing
  • Pole: Very rigid extruded aluminum, 2" diameter with quarter-inch wall
  • Base: Reversed contour for superior stability with a chemical-resistant coating
  • Casters: 65 mm for ease of transport over all surfaces
  • Limited Lifetime warranty

WARNING: If you are using a central active scavenger for waste gas collection, it may be necessary to adjust the vacuum/draw or utilize a scavenger interface valve to ensure proper function of the safety relief pop-off valve

Package Quantity: 1/Pkg Brand: Versa Material: Aluminum Pole; Aluminum knob (O2 Flowmeter) Overall Dimensions: 27" W x 27" D x 54" H Contains: 1 mobile Versa II anesthesia machine, 1 rebreathing F-Circuit with 2 liter bag, 1 non-rebreathing MJR Circuit with 1//2 liter bag, 4' section of 19 mm corrugated WAG tubing and 1 Pivetal clean air canister kit (1 bracket, 1 canister) Vet Web Disclaimer: Additional freight charges will apply to this product Animal Type: Small Animal Breathing Bag Included: Y Breathing Tubes Included: Y Cabinet/Roller Base: Y Overall Depth: 27" Co2 Absorber: Y Overall Height: 54" Flow Meter Range: 200 cc-4 LPM with aluminum knob and torque guard system Monitor Bracket: Y Oxygen Flush: Y Warranty: Limited lifetime warranty

09/01/2025 - 12/31/2025
Valid September 1, 2025 - December 31, 2025. *Vets* 0% for 12 months (12 equal payments) or 5.25% for up to 36 months on eligible capital equipment. *Excludes advanced imaging equipment *Valid on purchases of eligible capital equipment made between September 1 and December 31, 2025. To take advantage of the rates, equipment must be purchased by December 31, 2025 and installed, invoiced and finance contracts signed by customer by February 28, 2026. If non-eligible equipment is purchased and financed, it will be on a separate finance contract. Financing is available through Patterson Financial Services and subject to Patterson Financial Services approval. Offer, rates and terms are subject to change or termination at any time. Other restrictions and exclusions may apply. Some accounts may not be eligible. Consult your Patterson corporate equipment team with any questions

Promotions Expiration: 12/31/2025