Overview Versa II Anesthesia System supports 2 vaporizers or converts to a tabletop without any additional accessories.

  • Rebreathing/Non-Rebreathing Switch: Allows fast and easy conversion between rebreathing and non-rebreathing circuits
  • Administer a breath to the patient by pressing the button on top of the safety relief pop-off valve while squeezing the bag and watching the manometer, releasing the button when finished
  • Made with materials manufactured to withstand harsh chemical use
  • Added syringe holder for convenience
  • Vaporizer sold separately
  • Monitor Shelf Dimensions: 15.75" W x 7" D
  • O2 Flush Valve: Nominal 28 LPM output at 50 psi
  • Male and Female Endcaps: 23 mm taper to meet ISO standards
  • Fresh Gas Outlet: 15 mm taper to meet ISO standards
  • Absorber Canister Knob: Large fluted design allows for a secure grip while tightening canister
  • Dome Caps: Reinforced polycarbonate
  • Patterson Safety Relief Pop-Off Valve: Pressure relieves at 20–25 cm H2O. Easily administer a breath by using the push button. Less than 1 cm H2O pressure when fully open or closed. Cap included to allow for ventilator use as well as the ability to perform a pressure test without having to close the popoff valve and hold the button down during the duration of the test
  • Manometer: 0 – 60 cm H2O pressure, 0 – 60 cm H2O vacuum; maintenance-free
  • Inhale/Exhale/Bag Port: 22 mm taper to meet ISO standards; easy to remove and clean
  • Absorber Block: Chemical-resistant material with durable coating
  • Absorber Canister: 1200 mL capacity with divider for efficient use of absorbent
  • Absorber Gasket: Silicone for enhanced sealing
  • Pole: Very rigid extruded aluminum, 2" diameter with quarter-inch wall
  • Base: Reversed contour for superior stability with a chemical-resistant coating
  • Casters: 65 mm for ease of transport over all surfaces
  • Limited Lifetime warranty

WARNING: If you are using a central active scavenger for waste gas collection, it may be necessary to adjust the vacuum/draw or utilize a scavenger interface valve to ensure proper function of the safety relief pop-off valve